PUREPLAST Inc. Web Site

TRANSPARENT

INTRODUCTION
PureTherm 1001C is a clear, rigid PVC film. It is designed for blister packaging of pharmaceuticals and meets HPB, USP, and FDA (DMF-8668) requirements. Applications for PureTherm 1001C include blister packaging of tablets, capsules, lozenges, suppositories as well as use in laminations.

GENERAL DATA

Colour Natural or tint

Thickness Range 125 micron - 500 micron 5 mil.- 20 mil.

Plasticisers None

Maximum Width 1067mm 42"

Standard Roll Make-up
*Outer Diameter
*Inner Diameter
355 mm and 457 mm
76 mm paper core
14" and 18"
3" and 6"

* Larger o.d. and i.d. available on request.

NOMINAL YIELD

Sq. Inches/lb Sq. Meters/kg

5 mil. 4,200 125 micron 5.97

6 mil. 3,500 150 micron 4.98

7.5 mil. 2,800 190 micron 3.98

10 mil. 2,100 250 micron 2.99

11 mil. 1,900 280 micron 2.70

12 mil. 1,750 300 micron 2.49

15 mil. 1,400 380 micron 1.99

20 mil. 1,050 500 micron 1.49

GENERAL DATA

Clarity glass clear

Gels per 0.1 sq. Meter, 0.4 mm 7 max

Carbon particles, 0.8 mm 5 max

(per 1.0 sq. Meter) 1.5 mm 0

Gauge uniformity ± 10%

Specific gravity 1.33

Splicing frequency max. 3 splices per roll

Slitting width tolerance ± 1.5 mm

MECHANICAL PROPERTIES

Tensile strength 7000 psi ASTM D882

Elongation 100% ASTM D882

Elastic modulus 300,000 psi ASTM D882

Cold impact good

THERMAL PROPERTIES

Heat seal range 150°C - 190°C

Heat distortion temperature 75°C ASTM D1637-61

Dimensional stability ± 4% ASTM D2732

Flammability self-extinguishing

Thermoforming range 120°C - 175°C

CHEMICAL PROPERTIES

Resistance to grease fats and oils excellent ASTM D722-45

Resistance to acids excellent ASTM D534

Resistance to alkalides excellent ASTM D534

Vinyl chloride monomer concentration < 1 ppm

BARRIER PROPERTIES

Moisture Vapor Transmission Rate @ 10 mil. (gms/100 in² @ 37.8°C, 90% RH per 24 hr.) 0.20 ASTM F372

Oxygen Transmission rate @ 10 mil.
(cc/100 in² @ 23°C, 100% RH per 24 hr.) 1.2

Please read our disclaimer before acting upon or quoting any information contained within this site.
Copyright © PurePlast Inc.
This site best seen with a resolution of 800 x 600 or higher.
Most recent revision:

Colour	Natural or tint
Thickness Range	125 micron - 500 micron	5 mil.- 20 mil.
Plasticisers	None
Maximum Width	1067mm	42"
Standard Roll Make-up Outer Diameter Inner Diameter	355 mm and 457 mm 76 mm paper core	14" and 18" 3" and 6"

5 mil.	4,200	125 micron	5.97
6 mil.	3,500	150 micron	4.98
7.5 mil.	2,800	190 micron	3.98
10 mil.	2,100	250 micron	2.99
11 mil.	1,900	280 micron	2.70
12 mil.	1,750	300 micron	2.49
15 mil.	1,400	380 micron	1.99
20 mil.	1,050	500 micron	1.49

Clarity	glass clear
Gels per 0.1 sq. Meter, 0.4 mm	7 max
Carbon particles, 0.8 mm	5 max
(per 1.0 sq. Meter) 1.5 mm	0
Gauge uniformity	± 10%
Specific gravity	1.33
Splicing frequency	max. 3 splices per roll
Slitting width tolerance	± 1.5 mm

Tensile strength	7000 psi	ASTM D882
Elongation	100%	ASTM D882
Elastic modulus	300,000 psi	ASTM D882
Cold impact	good

Heat seal range	150°C - 190°C
Heat distortion temperature	75°C	ASTM D1637-61
Dimensional stability	± 4%	ASTM D2732
Flammability	self-extinguishing
Thermoforming range	120°C - 175°C

Resistance to grease fats and oils	excellent	ASTM D722-45
Resistance to acids	excellent	ASTM D534
Resistance to alkalides	excellent	ASTM D534
Vinyl chloride monomer concentration	< 1 ppm

Moisture Vapor Transmission Rate @ 10 mil. (gms/100 in² @ 37.8°C, 90% RH per 24 hr.)	0.20	ASTM F372
Oxygen Transmission rate @ 10 mil. (cc/100 in² @ 23°C, 100% RH per 24 hr.)	1.2