INTRODUCTION
PureTherm 1003C is a rigid PVC film developed for cold forming, fabricating and stationary applications. It exhibits excellent clarity, white break reistance and medium impact resistance.

GENERAL DATA

Colour	Standard: light blue
Thickness Range	100 micron - 500 micron	5 mil.- 30 mil.
Plasticisers	None
Maximum Width	1067 mm	42"
Standard Roll Make-up *Outer Diameter *Inner Diameter	355 mm and 457 mm 76 mm paper core	14" and 18" 3" and 6"

* Larger o.d. and i.d. available on request.

NOMINAL YIELD

Sq. Inches/lb

Sq. Meters/kg

5 mil.	4,130	125 micron	5.97
6 mil.	3,440	150 micron	4.97
7.5 mil.	2,750	190 micron	3.92
10 mil.	2,060	250 micron	2.98
12 mil.	1,720	300 micron	2.48
15 mil.	1,380	380 micron	1.96
20 mil.	1,030	500 micron	1.49

GENERAL DATA

Clarity	glass clear
Gels per 0.1 sq. Meter, 0.4 mm	7 max
Carbon particles, 0.8 mm	5 max
(per 1.0 sq. Meter) 1.5 mm	0
Gauge uniformity	± 10%
Specific gravity (natural and tints)	1.34HCC TP 008
Splicing frequency	max. 3 splices per roll
Slitting width tolerance	± 1.5 mm

MECHANICAL PROPERTIES

Tensile strength	7200 psi	ASTM D882
Elongation	100%	ASTM D882
Elastic modulus	300,000 psi	ASTM D882
Cold impact	low to medium

THERMAL PROPERTIES

Heat seal range	150°C - 200°C
Heat distortion temperature	75°C	ASTM D1637-61
Dimensional stability	± 4%	ASTM D2732
Flammability	self-extinguishing
Thermoforming range	120°C - 180°C

CHEMICAL PROPERTIES

Resistance to grease fats and oils	excellent	ASTM D722-45
Resistance to acids	excellent	ASTM D543
Resistance to alkalides	excellent	ASTM D543

  
Please read our disclaimer before acting upon or quoting any information contained within this site.
 Copyright © PurePlast Inc.
 This site best seen with a resolution of  800 x 600 or higher.
 Most recent revision: