PUREPLAST Inc. Web Site

TRANSPARENT

INTRODUCTION
PureTherm 1002C is a rigid PVC film which is characterized by its excellent impact strength. It has good clarity and white break resistance. PureTherm 1002C is engineered for use in industrial thermoforming applications requiring high impact resistance.

GENERAL DATA

Colour Transparent tints:
standard light blue

Thickness Range 125 micron - 635 micron 5 mil.- 30 mil.

Plasticisers None

Maximum Width 1067 mm 42"

Standard Roll Make-up
*Outer Diameter
*Inner Diameter
355 mm and 457 mm
76 mm paper core
14" and 18"
3" and 6"

* Larger o.d. and i.d. available on request.

NOMINAL YIELD

Sq. Inches/lb Sq. Meters/kg

5 mil. 4,130 125 micron 5.97

6 mil. 3,440 150 micron 4.97

7.5 mil. 2,750 190 micron 3.92

10 mil. 2,060 250 micron 2.98

12 mil. 1,720 300 micron 2.48

15 mil. 1,380 380 micron 1.96

20 mil. 1,030 500 micron 1.49

25 mil. 830 635 micron 1.17

30 mil. 690 760 micron 0.98

GENERAL DATA

Clarity glass clear

Gels per 0.1 sq. Meter, 0.4 mm 7 max

Carbon particles, 0.8 mm 5 max

(per 1.0 sq. Meter) 1.5 mm 0

Gauge uniformity ± 10%

Specific gravity (natural and tints) 1.34HCC TP 008

Splicing frequency max. 3 splices per roll

Slitting width tolerance ± 1.5 mm

MECHANICAL PROPERTIES

Tensile strength 7200 psi ASTM D882

Elongation 100% ASTM D882

Elastic modulus 300,000 psi ASTM D882

Cold impact medium to high

THERMAL PROPERTIES

Heat seal range 150°C - 190°C

Heat distortion temperature 75°C ASTM D1637-61

Dimensional stability ± 4% ASTM D2732

Flammability self-extinguishing

Thermoforming range 120°C - 180°C

Deep draw characteristics excellent

CHEMICAL PROPERTIES

Resistance to grease fats and oils excellent ASTM D722-45

Resistance to acids excellent ASTM D543

Resistance to alkalides excellent ASTM D543

Vinyl chloride monomer concentration < 1 ppm

BARRIER PROPERTIES

Moisture Vapor Transmission Rate @ 10 mil. (gms/100 in² @ 37.8°C, 90% RH per 24 hr.) 0.20 ASTM F372

Oxygen Transmission rate @ 10 mil.
(cc/100 in² @ 23°C, 100% RH per 24 hr.) 1.0

Please read our disclaimer before acting upon or quoting any information contained within this site.
Copyright © PurePlast Inc.
This site best seen with a resolution of 800 x 600 or higher.
Most recent revision:

Colour	Transparent tints: standard light blue
Thickness Range	125 micron - 635 micron	5 mil.- 30 mil.
Plasticisers	None
Maximum Width	1067 mm	42"
Standard Roll Make-up Outer Diameter Inner Diameter	355 mm and 457 mm 76 mm paper core	14" and 18" 3" and 6"

5 mil.	4,130	125 micron	5.97
6 mil.	3,440	150 micron	4.97
7.5 mil.	2,750	190 micron	3.92
10 mil.	2,060	250 micron	2.98
12 mil.	1,720	300 micron	2.48
15 mil.	1,380	380 micron	1.96
20 mil.	1,030	500 micron	1.49
25 mil.	830	635 micron	1.17
30 mil.	690	760 micron	0.98

Clarity	glass clear
Gels per 0.1 sq. Meter, 0.4 mm	7 max
Carbon particles, 0.8 mm	5 max
(per 1.0 sq. Meter) 1.5 mm	0
Gauge uniformity	± 10%
Specific gravity (natural and tints)	1.34HCC TP 008
Splicing frequency	max. 3 splices per roll
Slitting width tolerance	± 1.5 mm

Tensile strength	7200 psi	ASTM D882
Elongation	100%	ASTM D882
Elastic modulus	300,000 psi	ASTM D882
Cold impact	medium to high

Heat seal range	150°C - 190°C
Heat distortion temperature	75°C	ASTM D1637-61
Dimensional stability	± 4%	ASTM D2732
Flammability	self-extinguishing
Thermoforming range	120°C - 180°C
Deep draw characteristics	excellent

Resistance to grease fats and oils	excellent	ASTM D722-45
Resistance to acids	excellent	ASTM D543
Resistance to alkalides	excellent	ASTM D543
Vinyl chloride monomer concentration	< 1 ppm

Moisture Vapor Transmission Rate @ 10 mil. (gms/100 in² @ 37.8°C, 90% RH per 24 hr.)	0.20	ASTM F372
Oxygen Transmission rate @ 10 mil. (cc/100 in² @ 23°C, 100% RH per 24 hr.)	1.0