100% POST-CONSUMER RECYCLED PET
INTRODUCTION
PurePet ESD7500 is a high-clarity, static dissipative, 100% post-consumer recycled PET based
plastic sheet. This thermoformable product for trays, lids and clamshell containers, provides
superior structural and electrostatic protection for sensitive electronic components.
PurePet ESD7500 meets or
exceeds Military Specification MIL-B-81705-C, EIA-541, EOS/ESD S11.11 and Bellcore GR-1421-CORE
requirements for surface resistivity and static decay at 12% relative humidity. Available in
PRODUCT PROPERTIES
| Test Method | Typical Value | |
| Surface Resistance | EOS/ESD S11.11 | 108 to 1010 Ohms |
| Static Decay | EIA 541 | <2 seconds |
| Contact Corrosion | FTMS 101-C Method 3005 | No Corrosion |
| Outgassing | ASTM E-595 | TML .40% CVCM .01% WVR .20% |
| Polycarbonate Compatibility | EIA 564 | Compatible at 120°F |
| 12 Day Oven Aging | ASTM D-257 | 108 to 1010 Ohms/sq |
PRODUCT TESTING
PurePlast Inc. (PPi) tests physical and electrical properties and qualifies all materials
at the PPi Cambridge, Ontario technical center under rigorous test conditions by simulating
various environments and accelerating the aging process. When standard industrial or
governmental test procedures exist, PPi verifies internally generated results with testing at
appropriate independent laboratories. Documentation is available upon request.
PRODUCT CERTIFICATION
PPi certifies, with every order, that the electrostatic properties of PurePet ESD7500
are in full compliance with the requirements for static dissipative materials as described
in EIA-541 and EOS/ESD S11.11.
GENERAL DATA
| Test Method | Typical Value | |
| Specific Gravity | ASTM D-1505 | 1.33 |
| Clarity | Glass Clear | |
| Tensile Strength | 8300lb/in² | |
| Elongation (Break) | 200% | |
| Dart Impact | ASTM 1709A Modified | 500g @ 73°F |
| (½" dia head, 5" dia. clamp, 26" drop) |
400g @ 0°F |
NOMINAL YIELD
| Sq. Inches/lb | Sq. Meters/kg |
| 10 mil. | 2,080 | 250 micron | 3.01 |
| 15 mil. | 1,390 | 380 micron | 1.98 |
| 20 mil. | 1,040 | 500 micron | 1.50 |
| 25 mil. | 835 | 635 micron | 1.18 |
| 30 mil. | 695 | 760 micron | 0.99 |
| 45 mil. | 465 | 1140 micron | 0.66 |
THERMOFORMING GUIDELINES
Thermoforming guidelines may vary with equipment and process conditions. Specific
guidelines are available on request.
THE PROPERTIES AND SPECIFICATIONS LISTED ABOVE ARE INTENDED TO PROVIDE GENERAL GUIDANCE ONLY AND ARE NOT TO BE CONSTRUED AS A WARRANTY OR GUARANTEE OF ANY PARTICULAR PHYSICAL PROPERTIES OR MATERIAL CHARACTERISTICS.
