INTRODUCTION
PureTherm 1001C Amber is a clear, rigid PVC film. This film is the same as PureTherm 1001C with
the addition of Amber Tint designed to allow for the packaging of light sensitive pharmaceutical
products. This film meets USP standards as well as HPB and FDA (DMF-8668) requirements.
Applications include blister packaging of tablets, capsules, lozenges, and suppositories,
as well as use in laminations.
GENERAL DATA
| Colour | Amber | |
| Thickness Range | 125 micron - 380 micron | 5 mil.- 15 mil. |
| Plasticisers | None | |
| Maximum Width | 1016 mm | 42" |
| Standard Roll Make-up *Outer Diameter *Inner Diameter |
355 mm 76 mm paper core |
14" 3" or 6" |
NOMINAL YIELD
| Sq. Inches/lb | Sq. Meters/kg |
| 5 mil. | 4,200 | 125 micron | 5.97 |
| 7.5 mil. | 2,800 | 190 micron | 3.98 |
| 10 mil. | 2,100 | 250 micron | 2.99 |
| 15 mil. | 1,400 | 380 micron | 1.99 |
TYPICAL PHYSICAL PROPERTIES
OTHER PROPERTIES
See PureTherm 1001C Product Data Sheet
Typical transmission values for PureTherm 1001C Amber tint are well below the USP standard in the critical 290 - 450 nm range as illustrated below. This data was obtained through standard spectrophotometer analysis.
